Az
Ru
About us
Certificates
Career
Board of Directors
Our mission
Catalogs
Partners
Stonewool
Insulation materials
Waterproof Insulation
Thermal insulation
Technical insulation
Acoustic insulation
Insulation Ancillaries
Construction materials
Board Templates for Construction materials
Plasterboard Systems
Basic construction materials
Fittings
Our production
Exhibitions
Events
Vlogs
Stainless steel corner profile
This profile is used for making external corners (corners) that is created by using gypsum boards in systems where plasterboard is applied, and this is more stable and tidy against impacts.
This profile is used for making external corners (corners) that is created by using gypsum boards in systems where plasterboard is applied, and this is more stable and tidy against impacts.
Before applying plaster to the wall, it is installed on the insulating material. As a result, the sturdiness of the plaster is obtained.
At the same time, the product prevents cracks, ensures that the plaster stands firmly on top of the insulating material.
Facade plastering fillet, is used during insulating the facade of the building, in construction and in the insulation system
It is installed on the insulation material before plastering the facade. At the same time, fillet prevents the cracks, ensures that the plaster stays firmly on the insulating material
The density of the plaster fillet applied in the facade insulation system should not be less than 160gr/m2, the range should be 4*4mm and resistant to the alkalies.
The upper part of the fillet grids is covered with the latex layer and ensures the flexibility of the material, thus the plaster fillet does not crack or break up.
Dowels are intended for installation of thermal insulation (xps, stone wool) in a carrier design such as bricks, concrete, gas bottles. Thermostatic facade insulation dowel presented under the brand name amex, is consisted of the first class plastic dowel and steel nail. Dowels are intended for mounting of thermal insulation (xps, stone wool) to the carrier construction such as bricks, concrete, gasoconcrete.
The plastic dowels offered by us are made in Turkey and are made from first-class PVC plastics. These dowels are used for facade insulation works when using insulating materials such as rockwool, xps, pir, etc. on a supporting structure, such as brick, concrete, aerated concrete. It is mainly used for fastening insulation materials to the facades of low-rise buildings. It is not recommended to use at a height of more than 12 meters.
TECHNONICOL PU Logicflex sealant is a universal low-modulus polyurethane sealant. The sealant polymerizes with the interaction of air and moisture, by leading to a strong, airtight bond. Mastic has increased elasticity and high adhesion to various construction substrates: metal, concrete, brick, ceramics, wood. It can be painted after drying. The color of it is gray
TechnoNIKOL also produces a wide range of sealants. As the official representative of TechnoNIKOL in Azerbaijan, we import the vast majority of these sealants. TechnoNIKOL sealants are divided into 3 types: polyurethane, silicone, acrylic-based sealants. Sealants are used to fill (sealing) various kinds of cracks, gaps and joints from water. We have different ranges for different purposes. Please contact our sales managers so that we can better answer your question.
Mastic No. 23 (Fixer) is a multicomponent mass consisting of bitumen, styrene-butadiene thermoplastic elastomer or its modifications, filler, solvent and technological additives. Gluing seams of flexible tiles and other bitumen-based materials. Bonding bituminous materials to brick, concrete, metal, wood, ceramic and other surfaces.
TECHNONICOL 240 PROFESSIONAL fire-resistant mounting foam is a one-component polyurethane material in aerosol packaging with improved fire-fighting properties. The fire resistance limit is confirmed by a certificate of conformity in the field of fire safety and reaches 240 minutes.
TECHNONICOL PROFESSIONAL polyurethane foam cleaner is a propellant (burning gas) mixture released from an aerosol and it is using a spray gun or professional polyurethane foam gun.
The discs that we present are made in Russia and are manufactured in accordance with GOST.
Suspension PIM is produced for installation of insulating materials on flat surfaces without using any additional materials. The foam layer with pressure-resistant adhesive creates a strong bond with the surface to which the insulation PIM will adhere. Glass wool, stone wool, polyester, polyurethane foam, cork insulation products are used for gluing. The bottom sheet of the suspension PIM that we offer is galvanized sheet, and the nail is aluminum. The operating temperature range of suspension PIMs is between -10°C / +80°C. To ensure the strength of the bond, the temperature of the surface to be bonded should be 10°C higher.
NAILS FOR SHINGLAS are galvanized buff nails with a wide head, size 30 * 3.5mm.
Nails are specially designed for installation of flexible tiles on the roof.
Dacha B - toxunmamış polipropilen parça və funksional polimer örtükdən ibarət iki qatlı buxar maneə materialıdır. İzolyasiyanın istilik izolyasiya xüsusiyyətlərini qoruyur və bütün strukturun xidmət müddətini uzadır.
Adhesive rubber foam band (gasket) is produced from special elastomeric rubber and is used as an additional layer against vibrations in the joints of gypsum board profiles with the wall and in the joints with gypsum board.
Black Plain Film - produced using low and high density polyethylene (PE). In various places of construction and agriculture, waterproofing is used for protection purposes. The insulation layers are welded to each other by the help of special welding devices and they are joined to create a single insulation layer.
Nicoband Tape is a 3-ply all-purpose sealing and waterproofing tape. Available in 5 colors and can be used both indoors and outdoors as the surface is made of special foil and is resistant to sunlight (UV). It is a unique product for sealing, sealing and covering various cracks, leaks and holes. It is mainly used in the repair and installation of roofs, sealing cracks, joints, repairing damaged areas and gutters. Nicoband tape easily adheres to various surfaces: glass, wood, iron, concrete, etc. In addition, nicoband tape is used in various other areas, the names of which are listed below:
Aliminium Adhesive Foil – mostly used for insulation of ventilation ducts. It is sticky.
Plasterboard Interference Cover- this is used in residential and commercial areas, small houses and large manufacturing plants.
"Steel suspension dowel" is used for fastening metal suspended ceiling elements with overhanging wedges and similar constructions in concrete coatings.
Self-tapping drilling screw- A screw which has a special shaped head is intended to fasten plasterboard boards onto metal profile frames (wall thickness up to 0.7 mm) without pre-drilling the wall. They are designed for connecting (extending) ceiling profiles. TC 60/27 is applied together with the ceiling profile.
Snow protectors prevent snow avalanches, protect the drainage system from damage, and also provide a uniform snow load in the roofing system and additional thermal insulation (reduces heat loss). They are metal corners with a colored polymer coating on a long leg, installed directly in the process of laying the roof. The connection point is closed with the next bituminous roof covering, which provides reliable waterproofing.
Self-adhesive fiberglass tape is made from fiberglass materials and is used to reinforce drywall joints. When using plaster mixtures, sickle is used to avoid possible cracks at the junction of GKL sheets or other two surfaces.
Galvanized wire, which is used in many fields from construction to gardening, is 3 times more resistant to corrosion than other wires. This means that these wires designed for wooden poles have a lifespan of up to 3 times longer.
Please, fill out the required fields and receive a price quote as soon as possible.