PVC Polymer Membranes made of flexible PVC (polyvinyl chloride) of various thicknesses, colors and properties depending on the place of use are used for waterproofing foundations, roofs, tunnels, tanks and tanks, including underground structures. It is highly resistant to deformation and high temperature. It is waterproof, does not rot, flexible, environmentally friendly.
LDPE, HDPE polymer membranes are modern polymer waterproofing materials.
The TPO membrane is a thermoplastic polyolefin-based compound and is a new technological product that is resistant to atmospheric conditions, sunlight (uv), plant roots, high tear, puncture and wear resistance, offering a long service life.
EPDM membrane is synthetic rubber made from processed ethylene and propylene. Among rubber products, EPDM membrane's most distinctive feature is that it maintains its flexibility, tensile strength and elongation flexibility even during the high temperature changes that may occur.
PVC blue pool membranes are UV resistant and they are with added color and protection, durable outdoor membranes.
Black Plain Film - produced using low and high density polyethylene (PE). In various places of construction and agriculture, waterproofing is used for protection purposes. The insulation layers are welded to each other by the help of special welding devices and they are joined to create a single insulation layer.
Geotextile felt - as a separating layer in construction, in various earthworks, in the construction of road and railway highways, in the strengthening of earthen structures, in the installation of pipe systems, in landscape design, in the prevention of the penetration of construction gravel into the soil, in the filtration of water, in the prevention of washing of water from the upper soil layers. , it is used to prevent siltation of drainage pipes and to strengthen the soil.
A bubble drainage board made of high-density polyethylene is used in the foundation to protect the curtain walls from water and moisture, and the foundation insulation from the mechanical impact of the soil. During construction, backfilling creates an air gap, protecting the curtain walls of the foundation and the foundation insulation from various damages, including the uneven distribution of the pressure load of the poured soil layer, which leads to the formation of additional thermal insulation. At the same time, the special bubble structure of the board ensures that groundwater is drained away from the foundation.
The choice of insulation material for the joints of concrete structures depends on the joints, the mobility of the structures, the temperature regime of operation, the effect of chemicals, the value of the working water pressure and other factors taken into account during the design. PVC-based waterproofing tapes, having standard characteristics, provide reliable waterproofing of constructions with high flexibility, high pressure water flow and rapidly changing load.
The bituminous waterproofing membranes that we offer are produced by the Russian "TECHNONIKOL" plant. As the official representative of the TECHNONIKOL brand in Azerbaijan, our company presents to you all the products produced by TECHNONIKOL in our warehouses in Baku:
Bituminous Primer AquaMast is a solution of petroleum bitumen in specially selected organic solvents. It has high penetration power and short drying time.
It is basically designed for reliable adhesion of waterproofing materials. It is used both with dissolved bituminous materials and with coated waterproofing material.
Primer consumption - about 0.3 kg/m²
Waterproofing Mastic bitumen AquaMast for tonal foundations is a completely ready-to-use material based on petroleum bitumen, by containing technological additives, mineral fillers and solvent.
In addition to the sale of bituminous membranes, our company also sells a variety of bituminous and water-based primers and sealants. Bituminous primers and sealants mainly play the role of a smoothing, leveling and adhesive layer during the application of bituminous membranes.
Строительные работы всегда сопровождаются необходимостью заделывать трещины, удалять трещины, сколы и другие дефекты. Важную роль в таких действиях играют специальные герметики, в составе которых выделяются составы на основе каучука. Но применять его следует с осторожностью и по инструкции производителя, по официальной технологии.
"Primer Proof Fast-drying primer" is an ideal product used to ensure the best adhesion of welded roofing and waterproofing materials, flexible tiles, as well as to improve the adhesion of coated waterproofing mastics to the finished surface.
Bitumen mastic brand MBK-G-85 belongs to the category of warm roofing materials. The main aim of the material is installation of mastic roofs, gluing of roll roofing, waterproofing of metal, concrete, brick, wooden constructions and products. It can be used in buried structures and the structures in contact with the ground.
Cardboard material which is attached with the gluing method and filled in Bitumen on both sides.
Adhesive PVC tape is used to protect the surfaces of main gas, oil and water pipelines from corrosion, as well as to create an insulating and protective layer for the repair and assembly of pipe systems and waterproofing of heat pipes. Before the steel pipe is installed underground, it must be insulated against corrosion. This product is used for this purpose.
"Izospan" AF - Fireproof, reinforced, wind, moisture and vapor protection membrane.
Fireproof construction membrane MSV-NG, which is resistant to wind and moisture, is used in suspended facade systems and ventilated facades to protect the insulation layer from wind and water.
TECHNONICOL ALPHA VENT 95 C is a vapor permeable, wind protection membrane that provides moisture protection. ALPHA VENT 95 - protects insulation and construction structures from the destructive effects of moisture and wind. The membrane allows steam to escape from the thermal insulation.
TECHNONICOL ALPHA BARRIER 2.0 – vapor protection membrane, is used for thermal insulation and protection of construction structures from the effects of steam and moisture. By protecting the thermal insulation layer, the membrane ensures the preservation of its properties, thus extending the life of the construction as a whole.
It is used to protect the heat-insulating layer and internal elements of the wall structure from wind, atmospheric moisture, and it does not prevent water vapor from escaping from the insulation.
"ISOBOX B" is a two-layer vapor barrier material which is consisting of a non-woven polypropylene fabric and a functional polymer coating. It prevents moisture of the insulating layer and structural elements. It improves the thermal insulation properties and reduces operating costs.
Dacha B is a two-layer vapor barrier material which is consisting of a non-woven polypropylene fabric and a functional polymer coating. It preserves the thermal insulation properties of the insulation and extends the service life of the entire structure.
DACHA D is a universal hydro-vapor barrier material consisting of woven polyolefin and functional polymer layer.
High elasticity and strength of the material allows to withstand the significant mechanical loads. It is highly resistant to mold and bacteria. It preserves the thermal insulation properties of the insulation and extends the service life of the entire structure.
Floor waterproofing is achieved by applying a siliconized, removable film of self-adhesive bitumen binder modified with SBS polymers, protecting the binder with non-woven polypropylene.
Underlayment carpet – On pitched roofs where materials such as shingle, natural ceramics are used, a waterproofing layer must be used under the roof. For this, two types of lining carpets produced by TechnoNIKOL are used: TechnoNIKOL Anderep Ultra and TechnoNIKOL Next Self. It is self-adhesive and provides a waterproofing layer under the roof, glued to the OSB or wood layer.
Nicoband Tape is a 3-ply all-purpose sealing and waterproofing tape. Available in 5 colors and can be used both indoors and outdoors as the surface is made of special foil and is resistant to sunlight (UV). It is a unique product for sealing, sealing and covering various cracks, leaks and holes. It is mainly used in the repair and installation of roofs, sealing cracks, joints, repairing damaged areas and gutters. Nicoband tape easily adheres to various surfaces: glass, wood, iron, concrete, etc. In addition, nicoband tape is used in various other areas, the names of which are listed below:
Rubber Foam board - used for heat, moisture and sound insulation in heating, cooling and ventilation systems and also in other mechanical communication systems. It is mainly used in the insulation of ventilation ducts, mechanical devices, pipelines. According to the place of use, it is produced in different thicknesses, with or without glue, with aluminum foil/without foil and other forms. High water vapor diffusion and maximum resistance to fire. It is elastic, resistant to tearing. Due to its high resistance to corrosion, it extends the life of the equipment.
ODE Rubber Foam is used for heat, moisture and sound insulation in pipe insulation, heating, cooling and ventilation systems and also in other mechanical communication systems. It is mainly used in heating and cooling systems and insulation of pipelines. According to the place of use, according to the temperature of the carrier, the length of the trunk, it is produced in different thicknesses, aluminum foil/without foil and other forms. High water vapor diffusion and maximum resistance to fire. It is elastic, resistant to tearing. Due to its high resistance to corrosion, it extends the life of the equipment.
Insulation material which is produced from high-density stone wool fibers in the form of cylinders is used in heating and cooling systems, for heat and sound insulation of pipes.
It is produced covered with aluminum foil in order to increase resistance to sunlight and prevent moisture and heat loss. The product is produced in different diameters so that it can be used in pipes of different diameters. Cylinders of different thicknesses should be used at different temperatures.
Insulating material produced from high-density glass wool fibers in the form of a cylinder is used in heating and cooling systems, for heat and sound insulation of pipes.
Aliminium Adhesive Foil – mostly used for insulation of ventilation ducts. It is sticky.
Please, fill out the required fields and receive a price quote as soon as possible.
Az
Ru
About us
Certificates
Career
Board of Directors
Our mission
Catalogs
Partners
Stonewool
Insulation materials
Waterproof Insulation
Thermal insulation
Technical insulation
Acoustic insulation
Insulation Ancillaries
Construction materials
Board Templates for Construction materials
Plasterboard Systems
Basic construction materials
Fittings
Our production
Exhibitions
Events
Vlogs